On the first flight after opening box and charging battery.Drone took off and flew away without touching the remote. Can this be replaced? I cannot find drone
Matthew O'Quinn2020年12月26日
Dear JJRC,
We have a new H36F. Is has worked for half an hour but now the drone will not pair to the controller anymore.
Symptoms:
After turning on the drone (plugging in battery), the blue and red LED turn (solid) on. After 2 seconds, the blue LED turns off. The red LED stays on (solid). There is NO blinking at all.
The controller seems to work normally. After turning it on, the red LED blinks and there is a beep. Moving the left stick up and down results in two longer beeps and a solid red light. But the drone does not respond.
How can I reset the drone?
The battery of the drone is full (4.1-4.2 volts).
The batteries of the controller are full (I have tried fully charged NiMH and new alkaline batteries).
Thank you. Sven Hazejager
Sven Hazejager2020年12月26日
Hello, we have an R1 robot, before we could raise and lower the right arm and shoot but now it does not, we do not know if a pinion ran or is something programming.
Gailor Fuentes2020年12月26日
Unable to register
David Towers2020年12月26日
The red wire is loose and not staying in the drone so it doesn't work properly. Are you able to replace?
Karen McGuire2020年12月26日
Hello, On first use, my drone had a little crash (2m) indoor (using flow positionning, not GPS) Impossible now to pai with the drone. Front lights are fashing red and rear lights are flashing blue. Gimbal initialization is ok (it works when I inclinate the drone) I checked GPS, gyroscope and compass using Misison planner: they all work. My phone is able to connect to drone wifi but the app doesn't. I have checked all connections inside: they look good. Could you please help me to find a solution.
Regards, Daniel
Daniel FABRE2020年12月26日
The remote control will not pair with the shark I can’t figure out how to get the shot going
Richard2020年12月26日
Both the remote control and car not synchronize. Both keep blinking. I tried charging the battery but still not working. Kindly advise.
Lim Mong Sai2020年12月25日
Hi there, I cannot connect my drone (controller) via app. Using Pixel 4 phone, had your app installed as per manual. When turning drone and controller the only new network that my phone is detecting is "Ground-1ea4df”. But it is only 2.4 GHz. My Pixel 4 can discover 5GHz networks, my home modem is on this frequency. What is the problem? Why I cannot connect to the drone? Thanks
I can get it to link to my phone.
On the first flight after opening box and charging battery.Drone took off and flew away without touching the remote. Can this be replaced? I cannot find drone
Dear JJRC,
We have a new H36F. Is has worked for half an hour but now the drone will not pair to the controller anymore.
Symptoms:
After turning on the drone (plugging in battery), the blue and red LED turn (solid) on. After 2 seconds, the blue LED turns off. The red LED stays on (solid). There is NO blinking at all.
The controller seems to work normally. After turning it on, the red LED blinks and there is a beep. Moving the left stick up and down results in two longer beeps and a solid red light. But the drone does not respond.
How can I reset the drone?
The battery of the drone is full (4.1-4.2 volts).
The batteries of the controller are full (I have tried fully charged NiMH and new alkaline batteries).
Thank you. Sven Hazejager
Hello, we have an R1 robot, before we could raise and lower the right arm and shoot but now it does not, we do not know if a pinion ran or is something programming.
Unable to register
The red wire is loose and not staying in the drone so it doesn't work properly. Are you able to replace?
Hello,
On first use, my drone had a little crash (2m) indoor (using flow positionning, not GPS)
Impossible now to pai with the drone.
Front lights are fashing red and rear lights are flashing blue.
Gimbal initialization is ok (it works when I inclinate the drone)
I checked GPS, gyroscope and compass using Misison planner: they all work.
My phone is able to connect to drone wifi but the app doesn't.
I have checked all connections inside: they look good.
Could you please help me to find a solution.
Regards,
Daniel
The remote control will not pair with the shark I can’t figure out how to get the shot going
Both the remote control and car not synchronize. Both keep blinking. I tried charging the battery but still not working. Kindly advise.
Hi there,
I cannot connect my drone (controller) via app.
Using Pixel 4 phone, had your app installed as per manual.
When turning drone and controller the only new network that my phone is detecting is "Ground-1ea4df”. But it is only 2.4 GHz.
My Pixel 4 can discover 5GHz networks, my home modem is on this frequency.
What is the problem? Why I cannot connect to the drone?
Thanks