I have a jjrc X3. The drone and remote control pair and I can see the number of GPS satellites and the blue LED are solid and the green LED flashing. I cannot unlock the motor. I put both conrtol sticks inwards to the bottom, but the motor does not unlock and the lock icon remains on the remote control screen. Please help!
John Montgomery2018年02月10日
When I Turne on and accelarate he goes up and dont stop even if desacelarate!!!
Claudio2018年02月10日
Charged battery mini baby elfie flys short time and then drops from flight Is it a battery issue or pairing?
Kevin brown2018年02月10日
I forgot to unplug the battery on my jjpro vision goggles and the battery won’t work now I was wondering what brand it was so I could get a replacement for the battery
Vallen2018年02月09日
I recently purchased a jjrc jjpro X3 Hax. The drone itself works well, but the camera does not work well. Both the photos and the videos are recorded upside down. The recording time is 3 seconds at the most and the pictures come out completely gray. Many times neither the video nor the images are recognized. It has a micro SDHC card of 32 gB and class 10. There are no instructions on the side of the operation of the camera. Very dissatisfied with the product.
Jonathan2018年02月09日
Hi Concern, I bought one of your product jjrc h37 baby elfie. I am facing a problem in flying the elfie. Its falling down automatically after few second of flying started. So i need a possible solution for this. Hope your will give me a good new about this.
Regards Tanim
Tanim2018年02月09日
I have a JJRC X3 which worked fine out of the box on the first flight. Subsequently, the transmitter and receiver do not seem to be communicating as the transmitter power LED flashes and the Drone LEDs flash with only one beep on start up. Can you please explain the pairing sequence for the X3 transmitter (remote control) and receiver (drone) step by step, including any time requirements and all remote control switch settings. I have tried turning the drone on, then powering up the remote and pressing the throttle control (left) stick to the top and then to the bottom without success.
John Montgomery2018年02月09日
If I have to order new motors for jjrc h55 tracker. Do I order CW Motors or CCW Motors. Only one motor is bad but I'm going to replace all four please help me
David Astuto2018年02月09日
Hello I purchased a JJPRO HAX x3 from Gearbest recently and it was DOA when it arrived. I live in New Zealand. The issue I have is it refuses to claibrate at all. I suspect the controller is the problem. I have watched your instruction video and when I pair the controller with the X3 the light on the X3 just continue to flash three times green and then three times blue over and over. It has taken weeks to try and get Gearbest to help me out and honor the warranty under there DOA terms which they still will not do.
thi s is very frustrating and I really want to use this drone.
Do you sell parts direct? I am thinking I just need a controller that works.
any support you can offer would be greatly appreciated please.
I have a jjrc X3.
The drone and remote control pair and I can see the number of GPS satellites and the blue LED are solid and the green LED flashing. I cannot unlock the motor. I put both conrtol sticks inwards to the bottom, but the motor does not unlock and the lock icon remains on the remote control screen. Please help!
When I Turne on and accelarate he goes up and dont stop even if desacelarate!!!
Charged battery mini baby elfie flys short time and then drops from flight
Is it a battery issue or pairing?
I forgot to unplug the battery on my jjpro vision goggles and the battery won’t work now I was wondering what brand it was so I could get a replacement for the battery
I recently purchased a jjrc jjpro X3 Hax. The drone itself works well, but the camera does not work well. Both the photos and the videos are recorded upside down. The recording time is 3 seconds at the most and the pictures come out completely gray. Many times neither the video nor the images are recognized. It has a micro SDHC card of 32 gB and class 10. There are no instructions on the side of the operation of the camera. Very dissatisfied with the product.
Hi Concern,
I bought one of your product jjrc h37 baby elfie. I am facing a problem in flying the elfie. Its falling down automatically after few second of flying started. So i need a possible solution for this.
Hope your will give me a good new about this.
Regards
Tanim
I have a JJRC X3 which worked fine out of the box on the first flight. Subsequently, the transmitter and receiver do not seem to be communicating as the transmitter power LED flashes and the Drone LEDs flash with only one beep on start up. Can you please explain the pairing sequence for the X3 transmitter (remote control) and receiver (drone) step by step, including any time requirements and all remote control switch settings.
I have tried turning the drone on, then powering up the remote and pressing the throttle control (left) stick to the top and then to the bottom without success.
If I have to order new motors for jjrc h55 tracker. Do I order CW Motors or CCW Motors. Only one motor is bad but I'm going to replace all four please help me
Hello
I purchased a JJPRO HAX x3 from Gearbest recently and it was DOA
when it arrived. I live in New Zealand.
The issue I have is it refuses to claibrate at all. I suspect the controller is the problem.
I have watched your instruction video and when I pair the controller with the X3 the light on the X3 just continue to flash three times green and then three times blue over and over.
It has taken weeks to try and get Gearbest to help me out and honor the warranty under there DOA
terms which they still will not do.
thi s is very frustrating and I really want to use this drone.
Do you sell parts direct? I am thinking I just need a controller that works.
any support you can offer would be greatly appreciated please.
Kind Regards
Lance Wakefield